These are illustrative setups, not client stories: the businesses, names, numbers and links are fictional.
1. One code for the schedule, map and feedback form

A one-day conference has a printed agenda, a venue map, a speaker list and a feedback form. Printing four codes on a badge clutters it, and attendees scan the wrong one. A multi-link page puts all of it behind a single code: a hosted page with a title and a button for each resource.
Plans change on the day. A session moves rooms, a speaker cancels, the feedback form goes live after the closing talk. Because the page is always dynamic, you edit the buttons and every printed badge shows the new version without a reprint.
How to set it up on GetQR
- Type: Multi-link page (always dynamic)
- Title: the event name and date
- Buttons: Schedule, Venue map, Speakers, Feedback form, Code of conduct; up to 20 are allowed, but five or six is easier to read
- Frame: Label below, text EVENT INFO
- Export: PDF for the badge printer, PNG for slides and email
Where to put it
Print it on the back of attendee badges at about 1.2 inches, on the welcome banner at registration, and on the holding slide shown between talks. On slides, keep it on screen long enough for the back rows to scan.
Tip: Order the buttons by what people need right now. Put the schedule first in the morning and move the feedback form to the top after the last session.
2. Save-the-date that adds itself to the calendar

Wedding guests receive a save-the-date months in advance, stick it on the fridge and still double-book the weekend. An event code on the card adds the ceremony to their phone calendar with the venue address, time and a short note, so the date is blocked the moment they scan.
The same idea works for conference invitations. A code on the printed invite or the email footer puts the event straight into the attendee's calendar instead of leaving it to a reminder they might never set.
How to set it up on GetQR
- Type: Event
- Summary: Sam and Alex's wedding
- Where: the venue name and full address, so the calendar can open it in maps
- Start and end: ceremony start to the end of the reception
- Details: dress code and the wedding website address
- Frame: Ticket, text SAVE THE DATE
Where to put it
Put it on the back of the save-the-date or in a corner of the front, at least 1 inch wide. If the card has a textured or metallic finish, print the code on a plain area so ink and foil don't break up the pattern.
Tip: An event code is static. Confirm the date and time with the venue before printing, because any change means a new code and new cards.
3. Guest Wi-Fi without spelling out the password

Every event has the same moment: someone asks for the Wi-Fi, someone else reads out a password with mixed case and numbers, and three people type it wrong. A Wi-Fi code joins the network in one scan, so attendees can post, check the schedule and upload photos without queueing at the help desk.
For conferences it also cuts the noise at registration. Staff can point to a sign instead of repeating the password two hundred times.
How to set it up on GetQR
- Type: Wi-Fi
- Network name (SSID): the guest network set up for the event, never the venue's staff network
- Security: WPA, with the event password
- Frame: Label below, text JOIN THE WI-FI
- Export: PNG for table cards, PDF for larger signs
Where to put it
Use tent cards on tables, a sign by registration and a corner of the holding slide. On tables, about 1.5 inches is enough. Keep the network name printed in plain text next to the code for people whose phones need it typed.
Tip: Ask the venue for a separate guest network with its own password for the day. Wi-Fi details are stored in the code itself, so anyone who photographs the sign can join later.
4. Photo sharing page for guests' pictures

Guests take hundreds of photos at a wedding or a team offsite, and most of them never reach the hosts. A code on each table opens an upload page, such as a shared album or a folder set up for the event, so guests can add their pictures while the night is still going.
Dynamic mode helps here because plans change. If the album fills up or you switch services, you change the destination and the cards on the tables keep working. After the event, point the code to a thank-you page or the finished gallery.
How to set it up on GetQR
- Type: Link, Mode: Dynamic
- Destination: the upload page of your shared album; check it opens on a phone without an app install
- Frame: Label below, text SHARE YOUR PHOTOS
- Logo: a small monogram or event logo, with error correction H
- Export: PNG at 1000 px for table cards
Where to put it
Put a small card on every table, at the photo booth and by the exit. A tabletop frame at about 2 inches is easy to scan without picking it up. Avoid placing it right under candles or colored uplights that wash out the code.
Tip: Test the upload flow on a phone you've never signed in from. If it asks guests to create an account, many will give up.
5. Speaker slide that connects on LinkedIn

At the end of a talk, the speaker says connect with me and shows a URL nobody writes down. A LinkedIn code on the final slide opens their profile in one scan while the talk is still fresh, which is what both the speaker and the audience want.
Organizers can make one code per speaker and add it to the speaker page and the printed program too. That way the code travels with the speaker's name everywhere it appears.
How to set it up on GetQR
- Type: LinkedIn, Mode: Dynamic
- URL: the speaker's public profile address
- Frame: Label above, text CONNECT ON LINKEDIN
- Colors: dark code on white; projectors wash out light-on-dark codes
- Export: PNG at 1200 px for slides, SVG for printed programs
Where to put it
On slides, make the code at least a quarter of the slide height and keep it up for 20 to 30 seconds. In printed programs, put it next to the speaker bio at about 0.8 inches.
Tip: Ask speakers to send their profile URL in advance and check it opens the right person. Similar names are common, and a wrong link on a big screen is hard to fix mid-session.
Getting the basics right for events
Events are fast and crowded. People scan in dim ballrooms, from the back of a hall or while holding a drink, so make every code larger than you think it needs to be and give it a clear label. A bare square on a busy invitation gets ignored; a frame that says SAVE THE DATE or JOIN THE WI-FI tells guests exactly what happens next.
Keep the number of codes low. One multi-link code on the badge, one Wi-Fi code on the tables and one photo code is usually enough. Every extra code is another decision for the guest.
You can make all of these on GetQR for free, with no sign-up, no ads and no watermark.
- Print one test copy at final size and scan it under the venue's actual lighting
- Use a guest Wi-Fi network created for the event, never the venue's main network
- Send people only to pages that load quickly on mobile data, in case the Wi-Fi is busy
- Add a location code that opens the venue in maps on invitations to hard-to-find venues
Measuring what works with dynamic codes
Dynamic codes on GetQR record total scans, a per-day chart for the last 30 days, the country and the device type, without storing IP addresses. For a conference, that tells you whether people actually used the badge code, which day was busiest and whether the feedback link got any traffic after the closing talk.
Keep the private management link for each dynamic code in your event planning document. It is the only way to edit the destination, and it can't be recovered if it is lost.
Frequently asked questions
Can I change the schedule after the badges are printed?
Yes, if the badge uses a dynamic code or a multi-link page. Edit the destination or the buttons through the management link, and the printed code opens the new version.
Is it safe to put the Wi-Fi password in a QR code?
The password is stored in the code, so anyone who scans or photographs it can join. Use a separate guest network for the event and change its password afterwards.
Do event QR codes stop working after the event?
Static codes never expire. Dynamic codes keep working too, so you can repoint them to a thank-you page, a photo gallery or next year's event.
How big should a QR code be on a presentation slide?
Make it at least a quarter of the slide height, with a white margin around it, and test it from the back row during the tech rehearsal.
Can I match the code to our wedding colors?
Yes. Choose the code and frame colors, dot and corner styles, and add a monogram as a logo. Keep the code dark on a light background so phones can read it.